我又多尝试了一会儿，做了越来越多激进的更改，包括使用负的前后间距，最终让内容折叠了。然后我尝试将值恢复为默认值，以查看真正需要的是什么。似乎关键的设置是将 \s1 和 \r 的后间距因子都设为 -0.10（即负值）。使用这些值时，外观相对合理。（我会在下面发布设置。）这只是一个草稿出版物，所以问题不大，但无法大致得到我想要的效果确实让人烦恼。
如果有人能评论一下为什么需要这个负间距因子，那将很有趣。假设所有设置都没有额外间距，这些字段似乎应该基本上能放入网格中。
以下是我最终使用的参数（抱歉，我忘了我的界面是法语的……）。普通文本是 10pt，所以我将这些字段的字号设得稍小一点，为 9.5pt。
I played around with it a bit more, making more and more radical changes, including negative spacing before/after, and I finally got things to collapse, then I tried to return values to their defaults, to see what was really needed. It seems like the key values were making the after factors -0.10 (that’s negative) for both \s1 and \r. With those values, things look relative decent. (I’ll post the settings below.) This is just a draft publication, so it’s not a huge deal, but it was annoying to not get roughly what I wanted.
It would be interesting if someone could comment on why that negative spacing factor is necessary. Assuming everything is set to no extra spacing, it seems like those fields should basically fit into the grid.
Here are the parameters I ended up using (sorry I forgot my UI was in French…). Normal text is 10pt, so I made these fields slightly smaller point size, 9.5pt.
机器翻译自 English
