0 票
278 次瀏覽

Dear colleagues,
I have one machine in our team (toshiba r950, i5, 16Gb) where both paratext 8 and 9 (latest versions) has started to freeze after a while. Sometime after 15 minutes, sometimes longer. I have just updated that machine to the latest W10 1909 updates. Does anyone experience similar problems after recent W10 updates ? What could cause Paratext to freeze, but not other software ?
goodgoan

舊文章 - 以原文顯示
Paratext 由 (347 點) 提出
已重新顯示 | 278 次瀏覽

1 個回答

0 票
最佳回答

@goodgoan, is this happening when Logos 8 is open? If you scroll through several “pages” of a Logos 8 resource, it will sometimes cause Paratext 8 & 9 to freeze up, even up to several minutes. See the discussion in the Translators Workplace group on Faithlife. It’s a bug.

舊文章 - 以原文顯示
由 (163 點) 提出

Sadly no, Logos is not installed on that machine. I did install the latest keyman 12 etc. I tried going back to 8.0.100.50 but with the same result.

舊文章 - 以原文顯示

After updating windows 10 again, to the latest 18363.592, the problem went away. No more freezes.

舊文章 - 以原文顯示

相關問題

0 票
3 個回答 233 次瀏覽
大家好, 我的 Paratext 之前運作得很好,突然變得非常不穩定/會凍結 特別是當我嘗試切換視圖 開啟筆記 回覆筆記 執行傳送/接收(send/receive),或切換章節或書卷時,整個程式會凍結,有時長達一分鐘以上,Windows 會給我「 ... 在那一天開始的 任何建議都將不勝感激 這種不穩定情況嚴重到大幅拖慢了我的工作流程 謝謝! Aaron
PecanMango 112 提出 已提問 10月 22, 2024
0 票
0 個回答 190 次瀏覽
我與三位譯者進行遠端協作,只要可能,我們都偏好使用 Paratext Live 但當第三或第四位使用者加入會議時,我們經常遇到問題,Paratext 在同步期間會完全凍結 這很常見嗎? 根據我在其他地方讀到的資訊,如果沒有 ... 升級到 Paratext 9 後不久開始使用 Paratext Live 的,我們在所有不同的 9.x 版本中都經歷過這些問題
Olav Brennsæter 102 提出 已提問 3月 4, 2024
0 票
2 個回答 456 次瀏覽
我的一位同事報告說,他打字時,普通的空格偶爾會變成「窄不換行空格」(Narrow No-Break Space,u202F) 其實他當時報告的不是這個,而是我後來才查出來的 當這個問題發生時,它總是出現在特定的單字之間,而且可以重現; ... 實會透過「傳送/接收」(Send/Receive)共享,對嗎? 有人知道是什麼導致這個問題,或者如何縮小問題範圍嗎?
mnjames 1.9k 提出 已提問 8月 27, 2018
0 票
6 個回答 787 次瀏覽
My Paratext froze up completely and I'm unable to fix it. Already ran the install again with the repair option. Even follewed ... is a link to a short video of what is happening.
anon233143 252 提出 已提問 6月 4, 2018
0 票
1 個回答 192 次瀏覽
大家好 我在 PTXPrint 中嘗試了多種頁眉經文參考的選項,但行為看起來有點奇怪 1 - 當我嘗試在「頁眉+頁腳」選擇中選擇「參考範圍」(Reference Range)時,範圍分隔符會在 PT 參考設定中我目前使用的破折號(em- ... -mods.tex 中修正這個問題,修正內容會被插入到檔案的頂部,因此會被上述設定覆蓋 有什麼想法嗎?Phil
anon913937 124 提出 已提問 11月 19, 2025
Welcome to Support Bible, where you can ask questions and receive answers from other members of the community.
There is neither Jew nor Gentile, neither slave nor free, nor is there male and female, for you are all one in Christ Jesus.
Galatians 3:28
3,053 個問題
6,013 個回答
5,677 則評論
2,032 位使用者