0 票
280 次瀏覽

Dear colleagues,
I have one machine in our team (toshiba r950, i5, 16Gb) where both paratext 8 and 9 (latest versions) has started to freeze after a while. Sometime after 15 minutes, sometimes longer. I have just updated that machine to the latest W10 1909 updates. Does anyone experience similar problems after recent W10 updates ? What could cause Paratext to freeze, but not other software ?
goodgoan

舊文章 - 以原文顯示
Paratext 由 (347 點) 提出
已重新顯示 | 280 次瀏覽

1 個回答

0 票
最佳回答

@goodgoan, is this happening when Logos 8 is open? If you scroll through several “pages” of a Logos 8 resource, it will sometimes cause Paratext 8 & 9 to freeze up, even up to several minutes. See the discussion in the Translators Workplace group on Faithlife. It’s a bug.

舊文章 - 以原文顯示
由 (163 點) 提出

Sadly no, Logos is not installed on that machine. I did install the latest keyman 12 etc. I tried going back to 8.0.100.50 but with the same result.

舊文章 - 以原文顯示

After updating windows 10 again, to the latest 18363.592, the problem went away. No more freezes.

舊文章 - 以原文顯示

相關問題

0 票
3 個回答 233 次瀏覽
大家好, 我的 Paratext 之前運作得很好,突然變得非常不穩定/會凍結 特別是當我嘗試切換視圖 開啟筆記 回覆筆記 執行傳送/接收(send/receive),或切換章節或書卷時,整個程式會凍結,有時長達一分鐘以上,Windows 會給我「 ... 在那一天開始的 任何建議都將不勝感激 這種不穩定情況嚴重到大幅拖慢了我的工作流程 謝謝! Aaron
PecanMango 112 提出 已提問 10月 22, 2024
0 票
0 個回答 190 次瀏覽
我與三位譯者進行遠端協作,只要可能,我們都偏好使用 Paratext Live 但當第三或第四位使用者加入會議時,我們經常遇到問題,Paratext 在同步期間會完全凍結 這很常見嗎? 根據我在其他地方讀到的資訊,如果沒有 ... 升級到 Paratext 9 後不久開始使用 Paratext Live 的,我們在所有不同的 9.x 版本中都經歷過這些問題
Olav Brennsæter 102 提出 已提問 3月 4, 2024
0 票
2 個回答 456 次瀏覽
我的一位同事報告說,他打字時,普通的空格偶爾會變成「窄不換行空格」(Narrow No-Break Space,u202F) 其實他當時報告的不是這個,而是我後來才查出來的 當這個問題發生時,它總是出現在特定的單字之間,而且可以重現; ... 實會透過「傳送/接收」(Send/Receive)共享,對嗎? 有人知道是什麼導致這個問題,或者如何縮小問題範圍嗎?
mnjames 1.9k 提出 已提問 8月 27, 2018
0 票
6 個回答 787 次瀏覽
My Paratext froze up completely and I'm unable to fix it. Already ran the install again with the repair option. Even follewed ... is a link to a short video of what is happening.
anon233143 252 提出 已提問 6月 4, 2018
0 票
1 個回答 192 次瀏覽
大家好 我在 PTXPrint 中嘗試了多種頁眉經文參考的選項,但行為看起來有點奇怪 1 - 當我嘗試在「頁眉+頁腳」選擇中選擇「參考範圍」(Reference Range)時,範圍分隔符會在 PT 參考設定中我目前使用的破折號(em- ... -mods.tex 中修正這個問題,修正內容會被插入到檔案的頂部,因此會被上述設定覆蓋 有什麼想法嗎?Phil
anon913937 124 提出 已提問 11月 19, 2025
Welcome to Support Bible, where you can ask questions and receive answers from other members of the community.
Very truly I tell you, whoever accepts anyone I send accepts me; and whoever accepts me accepts the one who sent me.
John 13:20
3,053 個問題
6,013 個回答
5,677 則評論
2,032 位使用者